Dimplex Electric Panel Convector Heaters Wall Mounted with Timer PLXE Lot 20. A great choice for homeowners looking for a modern and efficient electric panel heating. With its natural white colour, gentle curvature and louvred grille, this heater will fit naturally into any room. These panel heaters features the CapSense controller, providing a more intuitive user experience with its backlit LCD display and touch-sensitive buttons. Digitally controlled, Electronic Timer modes.
7 Day programmable user timer - provides greatest flexibility to the user. Four time slots are available throughout the day and these can be customised for each day of the week.
Out All Day - (pre-programmed) - has the following preset times Monday to Sunday, which can be altered if desired 07.00 until 08.30 17.30 until 22.00. Home All Day - (pre-programmed) - has the following preset times Monday to Sunday, which can be altered if desired; 08.00 until 21.00. Holiday - (pre-programmed for 7 days at 10°C) - set the number of days required (from 1 to 300) and the temperature required.
7°C is advised if you just want to protect the property from frost while you are away. Eco - maintains a room temperature of 18°C. By reducing the room temperature slightly, significant energy savings can be achieved.
The green display colour indicates that the selected temperature provides a comfortable room temperature while reducing energy consumption. Manual - heats the room to a comfortable temperature of 21°C I copied this from q u i k - k i t. Frost Protect - maintains a room temperature of 7°C. This mode should be used to provide protection against frost as indicated by the blue display.Runback - allows the user to activate a timed heating period by pressing the Advance button when the appliance is in Standby mode. The settings of the timed heating period, duration and temperature can be configured in Runback Settings. Runback is enabled by default. Adaptive Start pre-heats the room ahead of a programmed heating schedule for only exactly the amount of time required to meet the desired target temperature at the desired time.
For example, if the product was following a timer which was set to 21 degrees at 7am, with Adaptive Start the product will begin heating before 7am to achieve 21 degrees at 7am, without Adaptive Start the heater will only begin heating at 7am. Open Window detection monitors the room temperature while the heater attempts to achieve a desired room temperature. If the room temperature does not change or decreases while heat is being emitted, the product will stop heating and enter a standby mode in order to not waste energy. Electronic 7 day programmable timer. Pre-flexed 1.3m cable (no fitted plug).
Class I - earth connection required. Splash-proof for use in bathrooms. Complies with Lot 20 of ERP Directive I copied this from q u i k - k i t. Metal Chassis, Air Outlet Grille & Control Moulding - Traffic White (RAL 9016). PLXC300E 3.00kW Model features a slotted grille.
Dimensions: All heaters are 430mm high and 108mm deep except the 3000W model which is 143mm deep. 150mm minimum clearance required from all edges of the heater.The heater must be wall mounted. Widths vary depending on size as follows.
Monday - Thursday: 7.30am - 4.30pm. Friday: 7.30am - 3pm. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Space Heaters".
The seller is "prime-electrical-group" and is located in this country: GB. This item can be shipped to United Kingdom, Guernsey, Jersey.